- Status
- Offline
- Joined
- Mar 5, 2021
- Messages
- 929
- Reaction score
- 0
Windows 10 - 11
FULL VERSION
1 day - 2.5$ BUY
7 day - 13$ BUY
30 day - 25$ BUY
Technical support is provided only in Discord: WRITE TO SUPPORT (CLICK)
Enable Aimbot
Hotkey
Offset x
Offset y
Multiplier
Smooth
Min Move
Dynamic Factor
Color Tolerant
Enable Field Of View
Enable Recoil Control
Rcs X
Rcs Y
Enable Triggerbot
Hotkey Preset
Load / Save Config
Smooth (base_smooth): This is the base smoothing value. Smoothing is used to make mouse (or any other input device) movements smoother and less jerky. The higher the smooth value, the slower and smoother the movement towards the target will be. This is especially useful for controlling movement in situations where precision is required, such as aiming in shooters.
Min move (min_move_threshold): Minimum move threshold. This setting determines the minimum distance the cursor must move to perform a move. If the difference between the current cursor position and the target is less than this value, the move will not be performed. This prevents unnecessarily small or insignificant movements that could be noise or off-target movements.
Dynamic smooth factor (dynamic_smooth_factor): This is a dynamic smoothing factor that changes depending on the distance to the target. The greater the distance to the target, the greater this factor, and vice versa. Using this parameter allows you to adapt smoothing depending on the situation: at greater distances, the movement will be smoother, and at smaller distances, it will be faster.
Speed multiplier (speed_multiplier): This is a speed multiplier that is used to speed up or slow down movement depending on the situation. Increasing this value will speed up mouse movement, and decreasing it will slow it down. The speed multiplier allows you to flexibly control the speed of movement depending on the selected weapon or other context.
Hotkey
Offset x
Offset y
Multiplier
Smooth
Min Move
Dynamic Factor
Color Tolerant
Enable Field Of View
Enable Recoil Control
Rcs X
Rcs Y
Enable Triggerbot
Hotkey Preset
Load / Save Config
Smooth (base_smooth): This is the base smoothing value. Smoothing is used to make mouse (or any other input device) movements smoother and less jerky. The higher the smooth value, the slower and smoother the movement towards the target will be. This is especially useful for controlling movement in situations where precision is required, such as aiming in shooters.
Min move (min_move_threshold): Minimum move threshold. This setting determines the minimum distance the cursor must move to perform a move. If the difference between the current cursor position and the target is less than this value, the move will not be performed. This prevents unnecessarily small or insignificant movements that could be noise or off-target movements.
Dynamic smooth factor (dynamic_smooth_factor): This is a dynamic smoothing factor that changes depending on the distance to the target. The greater the distance to the target, the greater this factor, and vice versa. Using this parameter allows you to adapt smoothing depending on the situation: at greater distances, the movement will be smoother, and at smaller distances, it will be faster.
Speed multiplier (speed_multiplier): This is a speed multiplier that is used to speed up or slow down movement depending on the situation. Increasing this value will speed up mouse movement, and decreasing it will slow it down. The speed multiplier allows you to flexibly control the speed of movement depending on the selected weapon or other context.
FULL VERSION
1 day - 2.5$ BUY
7 day - 13$ BUY
30 day - 25$ BUY
Technical support is provided only in Discord: WRITE TO SUPPORT (CLICK)
Last edited:
